Kreg Owners' Community

May 2013 Product Reviews (2)

Kreg Deck Jig -One Word

Used my Kreg Deck Jig for the first time the other day. 

Replaced all the wood deck boards on my deck.

I've got one word for the Deck Jig --- SLICK

Added by Fins59 on May 11, 2013 at 12:10pm — 1 Comment

Byrd Shelix Journel Head (installed on 15inch Jet)

Finally got the Byrd Shelix Journal Head installed on my planer.  Ordered it through Holbren, Sawmill Creek members get 10% off, SMC10 is the code.  First off, I installed the head by myself and it was completely painless, I was shocked to say the least.  I will say that I am thrilled that I had Byrd install new bearings for me and I would suggest if you are thinking of upgrading that you do the same thing.  I also ordered a new gasket for the gear box while I was at it, I would recommend…

Continue

Added by justin waldron on May 5, 2013 at 7:23pm — 4 Comments

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_