The the longer wall pcs. you are showing are called shelf standards. The smaller pc. is just a shelf bracket. Take your pics. with you to a Home Depot or Lowes and they should have exactly what yiu need.
It appears you did everything as advised on Kreg pdf. Is it possible your clutch setting was set too high. You were wise to do a test before actually assembling. I would hate to have that surprise if it were me.
"My only thought would be is that the shaft has enough play, that it may be binding a bit. Is it possible there may be some rust on the shaft? I would try a little WD40, and let it sit few moments. See if that works.
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…