"I think I'll create an iPhone app to calculate the measurement below so that using various "non standard" size lumber, anyone using the jig and this app can verify screw clearance and penatration:
Pd - Penetration Depth
Clutch setting was set pretty low. On my Makita drill/driver it was set to setting 4 out of 16. But even if it was too high, it would merely strip the mating workpiece, due to the embedded washer in the screw head, the screw would never be…"
It appears you did everything as advised on Kreg pdf. Is it possible your clutch setting was set too high. You were wise to do a test before actually assembling. I would hate to have that surprise if it were me.
Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…