For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (1 comment)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Are speaking of the round pedestal table? If so, I made the legs kind of on the fly. I wanted to make the pedestal square, so cut the rounded edges from 2 pcs of 2 x 6 making them 5" wide. Then I cut 2 pcs of 2 x 3 or 2 x4 down to 2" wide That made the square. In the center of the pedestal I cut to two pc. to fit tightly in the center ( this allows for solid ends to attach. For the legs themselves I again used 2 x 6's cut to length and 5" wide (depending on table size). and the bottom piece was tapered at a 30 degree angle, and attached to the pedestal using Kreg HD jig and screws and glue. On top I again used a 2 X 6 and tapered the end at 45 degrees, cut to match the top of the bottom. I glued that to the pedestal and the bottom piece. If you send me an email at oldfrog44@gmail.com, I can send you some pictures that I sent. I will really love seeing your table and how you built it.