John Harrison's Comments

Are speaking of the round pedestal table?  If so, I made the legs kind of on the fly.  I wanted to make the pedestal square, so cut the rounded edges from 2 pcs of 2 x 6 making them 5" wide.  Then I cut 2 pcs of 2 x 3 or 2 x4 down to 2" wide  That made the square.  In the center of the pedestal I cut to two pc. to fit tightly in the center ( this allows for solid ends to attach.  For the legs themselves I again used 2 x 6's cut to length and 5" wide (depending on table size).  and the bottom piece was tapered at a 30 degree angle, and attached to the pedestal using Kreg HD jig and screws and glue.  On top I again used a 2 X 6  and tapered the end at 45 degrees, cut to match the top of the bottom.  I glued that to the pedestal and the bottom piece.  If you send me an email at oldfrog44@gmail.com, I can send you some pictures that I sent.  I will really love seeing your table and how you built it.