Router Table Front View

This picture shows the router table from the front. The top is 32" W x 48" long. I made the router table 1" shorter than my table saw top to allow me to make a 3/4" MDF top that I will set on top of the router table to use as an assembly table and as a feed out table for my table saw. I can sticker the under side of the top to shim it to the exact height I want so it is just under the table saw height. I will also add stop blocks to the bottom of the top on all four sides to keep the top from shifting and the extra lip will give me room for clamping. I'll post those pictures when I get it made.

I used the Kreg jig on some areas of the cabinet and to also build the roll around frame the table is sitting on.

jerry-