Here is the completed project.
However the small section of timber retaining the lid did not have have enough glue area to retain the mass of the lid and partedfrom the box frame.
So I am in the process of resesigning the lid maybe remove the handle and drill finger pulls and allow the lid to slide completly out. Then install rare earth magnets to hold it closed. The dominos are the ebony ones I made some time ago and on the photo gallery somewhere
Tags:
Projects: Rockys Domino Box
Comment
Steve,
Thanks for your comments,
Inlay work is no real big deal once you get into it.
The strips you saw are the result of 3 days of rain and me wondering what to do, so commenced the path to discovering how to make and fit inlays commenced.
All they are is initally two strips if timber of contrasting colours.
Cut them into short lengths about 30 to 50mm, turn then sideways and sandwich them between two more pieces and glue them all up, a bit fiddly but what else can you do when its raining.
Once the glue has dryed saw of the excess on the sides and then carefully saw them into narrow strips.
You may wish to have a look on the net ,there should be some good info there, or I know a visit to Woodsmiths website and look in the additional online info will provide more info and pictures.
Regards
Robert Brennan
Yo James,
Thanks for sharing the impression, I got a real kick out of it as well,considering I made it after ferreting amout for scraps of material and then just kept adding bitsno plan no pressure just good results.
Robert
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community