glue

Comment

Comment by John Schaben on November 1, 2012 at 11:37pm

Hmm, I thought it was the PU in the picture. Oh well, I've used the white version also. Didn't find much difference between it and the TitebondII

Comment by Ken Darga on November 1, 2012 at 10:25pm

John,

The ''brown'' Gorilla glue is the type, that expands.

The glue pictured above, is the white wood glue.

Comment by John Schaben on November 1, 2012 at 9:21pm

I've used a fair amount of that. I think it gets into end grain a little better and is good if you have some voids. Downside is it foams to about 5X it's initial volume which can lead to foam out issues which is about the same as dealing with squeezeout of PVA glues, just harder to deal with. The foam can also push smaller parts out of alignment. I tried using it on an inlay once and in 20 minutes had pushed the inlay completely out of the relief. I do like it on most paint grade plywood projects as plywood is about half end grain.

Comment by Tila Clarke on November 1, 2012 at 9:03pm

It's never let me down. 

Strong and dries fast.

Comment by Ken Darga on October 31, 2012 at 7:55pm

Tila,

What advantages did you experience using Gorilla glue vs

other wood glues?

Thanks in advance for your reply.