Lectern 008
Lectern
Views: 133
Comment
-
Comment by Marty Rosenbloom on April 12, 2013 at 10:03am
-
Hey Mick, how goes it?
Yes, and I am just finishing another project: an easle with a bulliten board. I will post that is a week or so.
What are you working on?
By the way, the weather is just changing to spring here...finally!
Keep in touch.
Marty
-
Comment by michael evans on April 12, 2013 at 9:15am
-
Hi marty ,nice job i had a feeling you were building something.
-
-
Jim,
Thanks.
The best part for me is now that I am familiar with the Kreg Jig it is easy to figure out how and where to use the pocket holes. No plans were needed for this project....just a picture.
Thanks again,
Marty
-
Comment by james wilhelm on April 11, 2013 at 8:16pm
-
Marty , very nice design and finish , thanks for sharing , JIM !!
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community