Comment
Jim,
FYI---
The lazy susan bearings raceway, should be lubed also, so as to provide smooth operation.
An access hole(s) can be added, in appropriate location(s), in the base platform.
Insert the straw like tube onto the spray-tip, insert it into the holes, and lube the roller bears & raceway.
Some years back, I made a similar object, that utilized a lazy susan type design;
however, I designed/made it so that rotating member could lift off,
to facilitate transport, cleaning, service, and like.
The center pivot was a pin that rotated in a stationary member in the fixed base (table top).
(Sorry, don't have a pic of it, readily available).
To get some ideas, visit ''rotating work tops'', or the like---
akin to a rotating welding table top, or the rollers on a support stand.
Thanks Ken , I will tell them that , always open to Good advice form a good wood worker !!! I want to wish all the Kreg wood workers out there a very merry and safe Christmas holiday , JIM !!!!!!!
Jim,
Vasilene (sp) holds dust---
I'd suggest using a spray-on type ''dri-lube''.
Thanks for all of your nice comments Ken !Designed this for a 42 " Tv back in 07 and it is still working , they just add a little vasalene on the bearings now and then !
Like the way you designed the rotating top.
Simple and effective.
Nice design.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community