Oak hope chest. I used the kreg jig to fasten the support piece under the hinge to the back and sides of the chest. The panel frames are stub mortise and tenon joinery and the panels are just 1/4" plywood. It was all scrap wood i got from work for free, and it was my first real attempt to build a hope chest. The stain job came out pretty bad. I used Minwax Polyshades and wont use that again on a project like this. Oh well, it was mostly free.
Comment
Your project look very good to me! If you are having problems with finishing your work, yopu might want to contact Jay Boutwell and /or Steve Kidd, and there are probalby many others that can help you to. Post a request for help with your finishing in the general wood working. and you will get as much good advice as you want or need.
kenny
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community