100_1867
Comment
-
Comment by David Roberts on March 28, 2010 at 6:58am
-
thanks, great looking chair
-
Comment by Larry Barnett on March 27, 2010 at 11:20pm
-
The wood it KDAT.yellow pine. Kiln dried after pressure treated yellow pine.
-
-
what kind of wood is that?
-
Comment by Don Grubish on March 22, 2010 at 10:18pm
-
Now that's a cool design for a deck chair/bench/thing. Very cool, Larry!
-
-
I built this before i had the Kreg jig, which made it a lot harder Only a couple of mortise and tenon,which for me take a lot of time, a lot of 3/8"dowels and 3" screws. Sometime I countersink the screws and cover them with dowel plugs. I know building these with my New" Kreg Jig " will be a lot faster and stronger. And look better also.
-
Comment by Jeff Burchett on February 22, 2010 at 2:55pm
-
That is really nice, was the whole chair done with pocket hole joinery, or was there some mortise and tenon joinery in it.
-
-
Just think how many more screws I can hide with my new Kreg jig
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community