Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Color schemeBuilding a toybox for my grandson. I'am not good at choosing colors. I would like to get some ideas for a color scheme for this toybox. Any… Started by John in Beginners' Zone |
5 |
Nov 3, 2011 Reply by Craig Helming |
older Kreg jigMy jig is 15 years old; cast aluminum and used only for 3/4 inch thick material. Do I need to upgrade (buy a new jig) to make holes in 2x2… Started by Frank Densmore in Kreg Jig® Operation |
1 |
Nov 3, 2011 Reply by KregRep |
Bench ViseAny more information on the Kreg Bench Vise? Started by David Shinkle in Other Kreg® Products |
1 |
Nov 3, 2011 Reply by KregRep |
Kreg drill bit sharpening.Does anyone know how much it costs to have a Kreg drill bit sharpened? I'm assuming it would have to be shipped to Kreg's headquarters. Tha… Started by thetoolnut in Kreg Jig® Operation |
3 |
Nov 3, 2011 Reply by KregRep |
Curio CabinetI need to build a glass door curio cabinet measuring approx 72" tall by 48" wide and 15" wide. Does any one out there have an easy plan the… Started by Thomas E Hill in Beginners' Zone |
0 | Nov 3, 2011 |
Video for a home made wood chip collector system for a 13" thickness planerhttp://www.youtube.com/watch?v=7yzcCBWhMH4&feature=autoshare This is the link to my How to video. Dust collectors can cost 1000 dollars… Started by Ron Kelderman in General Woodworking |
8 |
Nov 3, 2011 Reply by Ron Kelderman |
Another Crazy Angle QuestionI am trying to trim out a bay window in a 110 year old house. I want to use 3/4 wood panels. I have figured the angle to be 20 deg. I hav… Started by Stew Millsap in Kreg Jig® Operation |
0 | Nov 2, 2011 |
Shelf Pin Jig - When ??Hey Kreg folks, I haven't heard much lately about the new shelf pin jig. Can you give us any info on it such as when it will be availabl… Started by Derrell Sloan in Other Kreg® Products |
7 |
Nov 2, 2011 Reply by Jens Jensen |
Wood expansion issues with table??I've got my wood all cut for a table I'm building for an outdoor kitchen. The top will be made of five 1x6 poplar boards and the legs are… Started by Roger Smith in Beginners' Zone |
3 |
Nov 2, 2011 Reply by mo khan |
Kreg Combo Screw HeadsSomeone mentioned that Kreg has now come out with a Phillips head/square head combo. That's great because I've been trying to find (locall… Started by Fins59 in Other Kreg® Products |
3 |
Oct 31, 2011 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service