Tags:
Replies are closed for this discussion.
Never knew why the plugs were so long. It just goes to prove,even an old timer like me can learn something new every day. Keep up the good work.Glad to see you moitering things.Don't know of any other tool manufacture that does what you're doing. Thank you for making this web site.
I find that using Minwax's Wood Filler works well. Scrape off any excess, let dry, and sand to a smooth finish. It stains well and is relatively inexpensive to use.
Thanks to all for the suggestions. At least I know that it is not something that I did not do correctly.
I too would like to express my complete satisfaction with this forum. I know of no other manufacture's site that is as helpful as Kreg. Thanks again to all.
By the way, I have found that the simplest way to solve my problem is taking a few minutes....well, several minutes....and cut off abou 3/16 of the blunt end of the plugs on my Hegner scroll saw.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service