uploading video

[Jens Jensen]

I was wondering how the easiest way to upload a 124 MG video is .If I do a regular upload Im sure it will take hour or there about..If I zip it it should be faster correct?? I no it depends on speed of computer  uploading speed
Thanks for replies I just uploaded a way to make your own pocket plugs if you are out in field working and run out of them

jens
Grandpas Workshop

[KregRep]

Jens,
If you're uploading a video, I don't think you'll want to "zip" it first. This is a compression technology used for sending files over email primarily... I'd recommend re-encoding the video to a smaller size and/or lower framerate. This will reduce the file size of the video making it easier to upload.

Also remember, this community allows you to embed videos from YouTube or Vimeo... so you may want to try uploading it to one of those sources and go about it that way if you're having troubles!

Good luck,
KregRep

[Jens Jensen]

This is what I am going to do is redo the video and hopefully it will work.thanks

KregRep said:

Jens,
If you're uploading a video, I don't think you'll want to "zip" it first. This is a compression technology used for sending files over email primarily... I'd recommend re-encoding the video to a smaller size and/or lower framerate. This will reduce the file size of the video making it easier to upload.

Also remember, this community allows you to embed videos from YouTube or Vimeo... so you may want to try uploading it to one of those sources and go about it that way if you're having troubles!

Good luck,
KregRep

[Jens Jensen]

Hopefully this is going to make it





Jens Jensen said:

This is what I am going to do is redo the video and hopefully it will work.thanks

KregRep said:

Jens,
If you're uploading a video, I don't think you'll want to "zip" it first. This is a compression technology used for sending files over email primarily... I'd recommend re-encoding the video to a smaller size and/or lower framerate. This will reduce the file size of the video making it easier to upload.

Also remember, this community allows you to embed videos from YouTube or Vimeo... so you may want to try uploading it to one of those sources and go about it that way if you're having troubles!

Good luck,
KregRep

[KregRep]

Jens,
you're going to want to go here instead:
http://kregjig.ning.com/video/video/newWithUploader

[Jens Jensen]

When I clicked on to the link and go to my folder where the video is at the video is not in there now if I go to simple loader II opens video .This is how I did the video and sent to you, Did it not work on your end because I previewed it here first an dit was playing ,I only looked at maybe 10 seconds.Maybe I need to download ning again

[KregRep]

For anyone having trouble uploading video... please remember that per Ning's requirements your video must be no larger than 100MB in size, and must be either .mov, .mp4, .mpg, .avi, .wmv, .3gp, or.3g2 file formats.

If you have any trouble uploading, it may help to first upload the file to a service like YouTube or Vimeo first as they have less stringent upload guidelines. Once you have the file uploaded to YouTube or Vimeo they'll provide you with an 'embed' code which you can add to this Ning community to share with everyone else.

[Jens Jensen]

http://i4.ytimg.com/vi/k5VAxqzkmX4/default.jpg


I tried Vimeo or what ever rand it was not working it froze up at 99% .Then I tried You tube and it loaded but I'm not sure if this is the correct upload to you . I'm not much on computers Thank God I have a real nice woodshop and lots of top notch tools

[Jens Jensen]

http://www.youtube.com/watch?v=k5VAxqzkmX4

KregRep said:

For anyone having trouble uploading video... please remember that per Ning's requirements your video must be no larger than 100MB in size, and must be either .mov, .mp4, .mpg, .avi, .wmv, .3gp, or.3g2 file formats.

If you have any trouble uploading, it may help to first upload the file to a service like YouTube or Vimeo first as they have less stringent upload guidelines. Once you have the file uploaded to YouTube or Vimeo they'll provide you with an 'embed' code which you can add to this Ning community to share with everyone else.