Kreg Owners' Community

Repairing "cloudy" spots cased by appling poly while humid

 

I just finished building a murphy bed,and after appling a minwax quick drying poly wipe,I have cloudy spots on the face panels.This appears to be moisture trapped under the poly.I need to know if this has happened to anyone else,and how would i fix it.

Views: 234

Reply to This

Replies to This Discussion

John,

It may have had some foreign material on the surface, before you applied the poly.

Sand it all down to bare wood---

allow the wood to air-dry out for 4-5 days.

Wipe the surfaces down with a lint free cloth dampened with mineral spirits.

Allow that to dry 3-4 hours.

Apply a sanding sealer.

Allow to dry.

Do a light sanding use 220 grit.

Remove the sanding dust.

Apply the top coat.

NOTE:  STIR the sanding sealer and the top coat---DO NOT SHAKE the containers.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_