Having problems as my saw doesn't have holes required to mount it to the jig. I have a Contractor Skilsaw HD 5687. There is only one hole and it is to far away to use it. Any ideas?
Thanks
Teresa
Tags:
Added a picture. Thanks in advance for any help or suggestions
Teresa, no problem here. The machine-screws on the Rip-Cut aren't actually designed to thread into the holes on your saw. Rather, they simply apply downward pressure to your saw's base plate.
See step 4 in your instructions:
http://www.kregtool.com/prodImages/kregripcutinstructions.pdf
exactly what Kregrep said....the screws are cone-tipped to bite into the saw base holding the guide in place
You just let those pointed screws clamp onto the plate.
Great. I misread and thought there should be holes in the saw . Thank you all so much for the help. I am excited to use the rip cut and my new saw!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service