Kreg Owners' Community

Does anyone have a procedure or know of a Kreg tuitorial regarding to correct way to join miter joints useing the Kreg Jig. I could probably figure it out but it might not be the correct or best way. Please advise. Thanks Charlie 

Views: 3213

Reply to This

Replies to This Discussion

Well charles this my not be the anwser you was looking for but I now one thing for sure make sure that you have a good blade on your miter saw I use Diablo it geves me a nice clean and stairght cut and for my miter joints I use my K-2 for my but joints and I use my kreg mimi jig for 45"s hope this help's a little.

Thanks for the reply. I will try the mimi jig. I will practice to get it the way I wanted it. That's a good start and thanks again. I will try to let you know how it worked for me.
 
David Dean said:

Well charles this my not be the anwser you was looking for but I now one thing for sure make sure that you have a good blade on your miter saw I use Diablo it geves me a nice clean and stairght cut and for my miter joints I use my K-2 for my but joints and I use my kreg mimi jig for 45"s hope this help's a little.

There's a Kreg video, or instruction sheet, that describes how to join miter joints, using the Kreg joinery methods.

http://www.youtube.com/watch?v=l1gXZWxvVtI

Key in this video that was mentioned, but not emphasized, is the width of the boards needs to be a minimum of 3".  You can go some narrower with the micro jig but if you want to get down to 1-1/2 or so, you are stuck with one screw and it will twist on you. DAHIKT.

If a frame is of a narrow size and it will only accommodate one screw, 

supplement it with a biscuit or dowel.

HI Ken - on a narrow frame like that, I just bisquit it or spline it and forget the screw. I'm starting to use half-lap miters on all of them anyway.

Ken Darga said:

If a frame is of a narrow size and it will only accommodate one screw, 

supplement it with a biscuit or dowel.

charles this is what good clean jiont looks like and I well take some pic's on haw to set up your mimi kreg for a 45% as soon asI get a drasser done.

Charles, there are many methods of doing miter angles depending on the project at hand.  All the members whom have replied to your post all have good sound advise.  I have posted on my page a detailed method of using the kreg jig to form different angles in wood miters that you might like to look at.  Some of the information  might  give you some ideas.  It solves all my problems with angles in cabinet and furniture building .  The information  is on the left side of my page and is called "turning corners in cabinets with angles".

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

New to K5 and pocket holes, any video’s on the materials listed below?

I am using Danny Proulx book on shop workstations. I am deciding whether to use MDF or Melamine. He calls for MDF. However; I like the looks of the melamine.  I am a little leery of using pocket holes for it. One of the main reasons is I have no…Continue

Started by Michael Lusk in Beginners' Zone May 24.

Adaptive Cutting System T-Track Stops Mod 1 Reply

I bought the ACS a couple of weeks ago & have been pleased with the results on my first small project (LP record crates)... I was disappointed with the plastic accessories for the table-top, especially the T-Track stops. I'm pretty sure they…Continue

Started by John Moore in Beginners' Zone. Last reply by Deac Manross May 17.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_