Kreg Owners' Community

OK, I am new to Kreg--got a kit for Christmas from my daughter.  My usual practice in joining 1" boards, edge to edge, was using #20 biscuits and glue, which has been satisfactory  so far.  What is advantage  of Kreg system?

Views: 1289

Reply to This

Replies to This Discussion

Well, you don't need to use clamps, so its faster.  I think its easier than biscuts myself, but I have used both within the last 2 months.

With biscuits there really is no wiggle  room form alignment ,I no that for a factor.

This is both good and bad.  Biscuits align well up-and-down, and that is their strength.   Biscuits also allow side-to-side movements which really helps to speed up assembly.  At times I have used both biscuits and pocket holes, alternating them every 3-6 inch, using biscuits for alignment and pocket screws for clamping. 

I think it is great to have both options.  Years ago, all I had was dowels. 

The biggest strengths of pocket screws are the ability to screw across the grain for strength, and not to need to clamp and wait while the glue sets up.

Jens Jensen said:

With biscuits there really is no wiggle room for alignment

Thanks.  I would like to look at the link.  I am now in process of building 4 poker tables, somewhat modeled after the one I posted on this service.  My poker buddies want them.  Most difficult part is getting a tabletop, glued and TRUE.  Email address is f7fdriver@gmail.com.

If you're building the octagon style poker table I would go with the Kreg Jig, that way you don't have to be so creative with getting good solid clamping pressure at odd angles. You could probably build an octagon with in a half an hour of making your cuts and be ready to move on to the next stage instead of waiting in a mass production situation you are finding yourself in.

Best response I received--you hit the nail on the head (is that a woodworker's cliche?) when you mentioned the most difficult task of clamping the octagonal surfaces of the table.    Thank you.  Bob

Denny de Baltz said:

If you're building the octagon style poker table I would go with the Kreg Jig, that way you don't have to be so creative with getting good solid clamping pressure at odd angles. You could probably build an octagon with in a half an hour of making your cuts and be ready to move on to the next stage instead of waiting in a mass production situation you are finding yourself in.

Colonel,

I am also new to the Kreg system.  I have found good information in the Kreg K3 Manual.  Kreg is revising it into a K4 Manual but I do not see that online yet.  So, I suggest looking at the Kreg K3 Manual most of which applies to the K4 http://www.rockler.com/tech/RTD10000075AC.pdf 

Your poker table is great.  For the ones which you are going to build, I think you could use Kreg edgejoining and edgebanding and other applications and techniques.

Semper Fi!

Bob, I'm glad my comment was of used to you! Good luck and post pictures of all your progress if you can find the time to do so!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_