Kreg Micro Jig

[Michael R. Cook]

I have the Kreg Jig Toolboxx and it came with a screw wheel to tell me which screw to use, but my Kreg Micro Jig didn't come with one. How do I know how to set my drill bit and what screw to use? I haven't looked for a wheel yet. Was hoping someone could help me, or at least give me an idea of what to do...

[Ed Ward]

Not sure if this will help you but here is a link to a screw chart

Screw chart

[KregRep]

Ed, thanks for linking to the screw chart.  That is a very useful reference to keep handy.

Michael, your Kreg Micro-Pocket™ Drill Guide (https://www.kregtool.com/store/c22/kreg-jigreg-accessories/p60/micr...) should've come with an Owner's Manual. If not, or in case you can't find it, I have included instructions below:
You can also access the instructions here: https://www.kregtool.com/webres/Files/KJMICRODGB-Instructions.pdf.

The most important part of choosing the right screw for your application is selecting the correct screw length. We suggest using the screw lengths shown below when joining alike material thicknesses, such as 1/2" to 1/2".
If you have any further questions, please get in touch with the Kreg Customer Service Team by phone at 800-447-8638 or by email at [e-mail]. They will be more than happy to assist you.