My Menards store shows on their website a 90 corner clampp which has a big v plate on the outside and looks like a smaller one inside to clamp your boards face to edge in a 90 degree fashion. It looks like it would be great to use for building nice square boxes. However the website says they are discontinued and I can't find them on the Kreg Website. Do you still make them, or was there a problem with functionality on them? I am working on building a queen sized platform bed with storage drawers and good square corners are mandatory.
Tags:
I was tempted to spend the AU$60 each to get the two that were at Carbatec Adelaide.
I like that there is a cut out that lets you make a t-joint as well.
What put me off is that they are ugly looking things.
I have clamp track and blocks set up and 4 sets of Irwin corner clamps on medium duty clamps. For box joints with the fingers slightly proud for sanding I need to pack out the clamp to get the fingers closed. I like the medium clamps for boxes as you can clamp from the sides with them and the pads don't foul the fingers like the HD ones do.
I love mine!
It's a little awkward to get the hang of, but is a truly useful part of my cabinet building tool set.
I like the look of the new version better, play the waiting game for Caratec to get them in.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service