Kreg Owners' Community

My Menards store shows on their website a 90 corner clampp which has a big v plate on the outside and looks like a smaller one inside to clamp your boards face to edge in a 90 degree fashion. It looks like it would be great to use for building nice square boxes. However the website says they are discontinued and I can't find them on the Kreg Website. Do you still make them, or was there a problem with functionality on them? I am working on building a queen sized platform bed with storage drawers and good square corners are mandatory.

Views: 666

Reply to This

Replies to This Discussion

I was tempted to spend the AU$60 each to get the two that were at Carbatec Adelaide.

I like that there is a cut out that lets you make a t-joint as well.

What put me off is that they are ugly looking things.

I have clamp track and blocks set up and 4 sets of Irwin corner clamps on medium duty clamps. For box joints with the fingers slightly proud for sanding I need to pack out the clamp to get the fingers closed. I like the medium clamps for boxes as you can clamp from the sides with them and the pads don't foul the fingers like the HD ones do.

I love mine!

It's a little awkward to get the hang of, but is a truly useful part of my cabinet building tool set.

Kreg® Corner Clamp

I like the look of the new version better, play the waiting game for Caratec to get them in.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_