Kitchen Cabinet Doors
Replies to This Discussion
-
Permalink Reply by Jens Jensen on
-
What kind of doors .Raised panel or what
-
Permalink Reply by Joseph Haynes on
-
Trying to build doors in the wilderness. Plain panel
Jens Jensen said:What kind of doors .Raised panel or what
-
-
I am using a cedar faced ply for the panel and a cedar frame.
Joseph Haynes said:Trying to build doors in the wilderness. Plain panel
Jens Jensen said:What kind of doors .Raised panel or what
-
-
Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
-
-
What is a rabbit and a dado. Novice as to terminology
Jens Jensen said:Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
-
Permalink Reply by Bob Sanders on
-
This might be somewhat helpful.
http://www.associatedcontent.com/article/364507/building_frame_and_...
Try a few searches on YouTube as well... I know there are lots of helpful videos out there.
-
-
Bob sent you some great info on rabbits and dados Good advice there
Good luck
Joseph Haynes said:What is a rabbit and a dado. Novice as to terminology
Jens Jensen said:Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
-
-
for some reason the other site would not open for me so here is another one
Jens Jensen said:Bob sent you some great info on rabbits and dados Good advice there
Good luck
Joseph Haynes said:What is a rabbit and a dado. Novice as to terminology
Jens Jensen said:Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
-
-
-
I dont think this is going to fly either Let me no
-
-
Doors are one thing I don't use the Kreg on. I use router bits designed for this with the router mounted in a table. Stile and rail
bits aren't cheep but are a good investment.
-
-
I Have the bits but how do I guide the top rail to cut the profile on the end,.
Joseph
Michael Veach said:Doors are one thing I don't use the Kreg on. I use router bits designed for this with the router mounted in a table. Stile and rail
bits aren't cheep but are a good investment.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Free Hand Guard (dust collection)
Hi. I'm wondering if anyone has used the Woodpecker Free Hand Guard for dust collection on their bench top router table during pattern routing. How effective is it? It's adaptable to any router table. Continue
Started by Keith Morgan in Beginners' Zone Nov 8.
Keg Easy-Step Collar and XL 1 Reply
Does Keg Easy-Step Collar work with Kreg XL?
Started by Nick in Beginners' Zone. Last reply by Ken Darga Oct 28.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
