Tags:
Hello Brandon
Jointers, for the hobbyist, most commonly come in two capacities, 6” and 8” ( with a few 4” out there ) meaning that they will dress up the face of a board up to the size of their capacity, but are mainly used to dress the edge of a board to join it seamlessly to another ( or others) for door panels or table tops for a couple of examples. There are industrial jointers that have up to an 18” capacity ( and there may be even larger models).
The planer is used predominantly to dress up the face of a board and can only dress up the edge of a very narrow work piece (board) and only then with a jig designed to hold it vertically to the cutters while being passed through.
If you have not seen these tools, I would suggest that you log on to www.grizzly.com and click on to woodworking machines.
Oh yes, the only really stupid question is the one thought of, but not asked.
kenny from Sundre
Hello Brandon
Jointers, for the hobbyist, most commonly come in two capacities, 6” and 8” ( with a few 4” out there ) meaning that they will dress up the face of a board up to the size of their capacity, but are mainly used to dress the edge of a board to join it seamlessly to another ( or others) for door panels or table tops for a couple of examples. There are industrial jointers that have up to an 18” capacity ( and there may be even larger models).
The planer is used predominantly to dress up the face of a board and can only dress up the edge of a very narrow work piece (board) and only then with a jig designed to hold it vertically to the cutters while being passed through.
If you have not seen these tools, I would suggest that you log on to www.grizzly.com and click on to woodworking machines.
Oh yes, the only really stupid question is the one thought of, but not asked.
kenny from Sundre
o ok i understand the difference now. thanks a lot kenny.
one more question though. so i know a planer cuts the wood on a horizontal plane and from the pictures i have seen of a jointer it looks as though to cut the wood on a vertical plane. is this correct?
kenny from Sundre said:
Hello Brandon
Jointers, for the hobbyist, most commonly come in two capacities, 6” and 8” ( with a few 4” out there ) meaning that they will dress up the face of a board up to the size of their capacity, but are mainly used to dress the edge of a board to join it seamlessly to another ( or others) for door panels or table tops for a couple of examples. There are industrial jointers that have up to an 18” capacity ( and there may be even larger models).
The planer is used predominantly to dress up the face of a board and can only dress up the edge of a very narrow work piece (board) and only then with a jig designed to hold it vertically to the cutters while being passed through.
If you have not seen these tools, I would suggest that you log on to www.grizzly.com and click on to woodworking machines.
Oh yes, the only really stupid question is the one thought of, but not asked.
kenny from Sundre
Hello again, Brandon;
As Robert pointed out, the jointer will dress up the "face", (the horizontal plane) of a board , but only a board width up to it’s capacity, and it will also dress the "edge" ( the vertical plane, if you will) of any width of board that can be kept perfectly perpendicular to the cutter blades as it is passed through. What must be taken into consideration here, is that passing a work piece through either of these machines should remove the irregularities in the surface but does not necessarily mean that the piece is “true”. A “true” or “straight” piece is for it to be equal in width and thickness, and to not be bowed or twisted.
kenny from Sundre
Hello again, Brandon;
As Robert pointed out, the jointer will dress up the "face", (the horizontal plane) of a board , but only a board width up to it’s capacity, and it will also dress the "edge" ( the vertical plane, if you will) of any width of board that can be kept perfectly perpendicular to the cutter blades as it is passed through. What must be taken into consideration here, is that passing a work piece through either of these machines should remove the irregularities in the surface but does not necessarily mean that the piece is “true”. A “true” or “straight” piece is for it to be equal in width and thickness, and to not be bowed or twisted.
kenny from Sundre
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service