Tags:
Hello, my name is John, I live in a little village in Leicestershire, England. I am a carpenter/joiner by trade and own my own business, I am a big big fan of Kreg tools and to be honest always look for a way of using them on most jobs.
john said:Hello, my name is John, I live in a little village in Leicestershire, England. I am a carpenter/joiner by trade and own my own business, I am a big big fan of Kreg tools and to be honest always look for a way of using them on most jobs.
John, are Kreg products hard to find over there in England?
Hello, name is Leroy and i bought a Kreg jig to make butt joins while rebuilding a 1969 travel trailer. when replacing wood in the trailer there are many places where you can not get to the back - you can only work from the front. the jig works very well - my only problem is the clamp can not fit behind the wall in come places so i have to hold it by hand some time. you know how hard that can be - does any one know of a clamp that is small in the back - many times a clamp that is about 1 inch in the back would work great.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service