Kreg Owners' Community

 Hello,

I'm thinking about making a dresser for my daughter's room, but am not a cabinet maker. My first attempt at making drawers was quite frustrating and grueling. It was not until yesterday I saw the Kreg drawer mounting systems. Have any of you used this before, how much easier does it make it? Seeing this product gave me new hope. Plus any feedback or tips would be helpful.

Views: 381

Reply to This

Replies to This Discussion

And Thank you.

DIY Dressers?

I always dress myself.   lol

You can do a search in the box at the top-right for "cabinet" and you should see discussions about cabinet's along with some images.

There are some really experienced cabinet makers on here who can definately help you.

Hi Tom - The Kreg drawer mounting system is just for installing the drawer slides, no help at all in building the drawers. A drawer  is basically just a box, a cabinet is just a collection of boxes within a larger box. I see many dressers that do not even use slides, instead the drawer box just slides on rails built into the cabinet.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_