Kreg Owners' Community

I am designing a wall cabinet to put over my washer and dryer.  I am working on maximizing the wood usage and minimize the wood purchased. 

Current dimensions are:
52" wide
30" high
16" deep

Wood shopping list:
1 sheet of 3/4" ply
4 1"x3"x8' boards

I hope to be building this soon and put the plans up here.

Views: 1312

Reply to This

Replies to This Discussion

Hey, what about a cabinet under washer and dryer? I have the front loading type and the cabinets to mount them on are really expensive. Do you think it would be hard to build with a drawer in each? Mike
If I were to build one, I would likely use 2x4s for the frame and skin it with ply and add some drawers. It shouldn't be too bad though.
I built one for our front load washer. I over killed it, 4x4 for corners and bolted on 2x6's. Skinned with 3/4 plywood. It is one heavy base as that is what I wanted to make sure the washer did not shake at all. It works well and had no problems with it...
This will be a great storage application project... all storage projects are popular, it seems we all have so much stuff and just need an affordable storage solution to come to the rescue! Hopefully the Kreg Jig works perfectly in this application! Looking forward to photos if you take any!

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Adaptive Cutting System/Saw Blade

I have had the ACS for about a year.  Was wondering if there any other blades, like a Diablo, that will fit the saw?Continue

Started by Randall H Gress in Beginners' Zone on Saturday.

AutoMaxx 6" clamp not working

I have been using the Automaxx 6" clamp for two plus years, and recently the clamp is impossible to close the handles to secure the work and my jig. I cannot close the handles no matter how much pressure I can exert. I open the clamp to max to reset…Continue

Tags: clamp, inch, 6, Automaxx

Started by Anthony M Calabrese in Other Kreg® Products Feb 12.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 2 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service