Kreg Owners' Community

Good day everyone; my name is Bruno from San Diego, CA. Building dog holes on a bench top; looking for info specific on proper set up, hole distance, etc., with Kreg's bench dogs, inline clamps, and Bench Clamp With Bench Clamp Base. Thanks!

Views: 328

Reply to This

Replies to This Discussion

Bruno,

While I can't give any specifics for use with Kreg bench dogs, the standard size for bench dog holes is 3/4".  As for spacing them I have never heard of a standard.  I would suggest spacing them based on the travel of your vise.  You want to be able to secure the work piece between the bench dog and the tab on the vise, so the maximum spacing you could use is the travel distance.  I would probably space them closer to give more clamping flexibility.

Hope this helps, Don

Thank you Don; very much appreciated!

3/4 or 19mm is the Kreg standard hole size. Festool is 20mm as are most dogs from metric countries.

Kreg mobile work centre spacing is 4" I belive and Festool use 96mm with Kreg shelf pin Jig and Bosch guide rail at 32mm can do spaces at 64 and 96. Shelf pin jig works for me on edges as my holesaw set has the matching pilot hole size.

Inline clamp has about 4.5" travel so either 4" or 96mm will work. My bench clamps have Armor 3/4 dogs with some 5/16 allthread so I avoid having to reach under the table and I can box it off for down draft dust collection.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

1x6 into a 4x4? 1 Reply

Started by Dave N in Kreg Jig® Projects. Last reply by Ken Kortch 10 hours ago.

Rip-Cut Ruler 4 Replies

Started by Cynthia Alaniz in Beginners' Zone. Last reply by KregCS Sep 19.

Concealed hinge jig 1 Reply

Started by Michael B in Kreg Jig® Operation. Last reply by Edward Weitsman Sep 19.

Pocket screws to attach table tops 1 Reply

Started by Joe L in General Woodworking. Last reply by Glen S Sep 4.

new member

Started by Al Baker in Beginners' Zone Aug 30.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_