Kreg Owners' Community

After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. 

Then a friend who is also a Kreg dealer told me about the K5.

i bought one and set it up. I must say it's pretty impressive. The drill bit that comes with it is super sharp. Drills PH in soft maple very clean and quickly.

i have found myself pocket holing lots of shop projects and cabinets.

Only thing I can't figure out is setting the stop color on the bit for 1/2 " material.

I can set it for 3/4, but lost when it cones to 1/2 inch stuff.

Views: 281

Reply to This

Replies to This Discussion

Please contact our team at TechnicalSupport@kregtool.com or 800-447-8638 - they will be happy to assist you with this. Thanks!

I don't use a K5 jig so excuse my ignorance.

Can't you just set the jig height for 1/2 inch, put a U.S. nickel (5 cent coin) on the bottom of the jig, gently insert the drill bit into the bushing hole until the drill bit tip touches the nickel, adjust the depth collar until it touches the top of the jig bushing, and then tighten the depth collar set screw?

Dave, 

When working with 1/2" material and the K5 system, you will want to ensure that your drill guide block is set to the 1/2" setting.  Then using the setup block, you will want to have the tip of the bit going through the 3/4" labeled hole as this is the size of screw you will be using.  Just tighten down your depth collar and you are good to go.  Please let us know if you have any other questions that we can assist you with.  

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

A beginner wants to create a profile 2 Replies

Hi,I've just been accepted as a memeber (thank you!) for this community forum.  I was asked to fill out profile information, but when I click on the like that was sent to me, it fails.  I can see most of the page it's trying to bring up, but I…Continue

Started by Dan Zambon in Beginners' Zone. Last reply by KregRep on Thursday.

90 Degree Corner Clamp 1 Reply

What is the purpose of the round piece cut at an angle that can be rotated and locked at 2 positions? Continue

Started by Grant Armstrong in Beginners' Zone. Last reply by KregRep Nov 25.

Product Reviews

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_