Well you have already conquered woodburning, tin punch, and boat building. So I would guess the next thing in line would be something that involved knitting! LOL
It holds balls of yarn letting it dispense out the holes on either end?
Just kidding. Give us a hint. What room is it for?
I was leaning toward a speaker that goes on a stand with a hole for the piece that the stand screws into on the bottom. However... the top hole??? That kills that theory I think. My first reaction was a subwoofer but I have never seen one with that middle support. Is it particle board?
The answer is: it's called a box drum. I'm not done building it, but imagine me adding 1/4" plywood to the two sides, so only the holes on either end remain open. Then, sit on one of the long sides and beat on the plywood. It creates an incredible sound. Check out youtube.com and enter box drum. You'll be amazed!
All of my cuts are slightly beveled. I am leaning on saw in one direction to keep it tight because it feels like there is a tiny bit of looseness in the saw sled at the rear. I don't have this problem with the Accu Rip and the same sled. Had to…Continue
Ok, just to let you know. I don't know one end of a bit of wood to the other !I need to build a loft bed for my 14yr old daughter for her new small room.would 30X70mm be large enough to make it out ofThanks for any inputPS anyone got any plansContinue
I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…