Kreg Owners' Community

Rick R's Discussions (14)

Discussions Replied To (13) Replies Latest Activity

"My thought would be to cut the 1/4" off the bolts. I had no issues with the bolts th…"

Rick R replied Jul 29, 2012 to Kreg Bandsaw fence

9 Jul 31, 2012
Reply by William Brady

"Rockler carrys tracks as well. http://www.rockler.com/product.cfm?page=21967&sit…"

Rick R replied Jul 18, 2012 to Substitute for Kreg Tracks?

24 Feb 27, 2014
Reply by Ken Darga

"I don't have a lot of experience with cutting on the bandsaw. I have used them many…"

Rick R replied Jul 17, 2012 to Kreg Bandsaw fence

9 Jul 31, 2012
Reply by William Brady

"Can you trim the plastic insert to sit flush? I would think that the plastic plugs a…"

Rick R replied Jul 17, 2012 to PLASTIC PLUG INSERTS

6 Jul 19, 2012
Reply by Terry Hennessy

"http://ana-white.com/2011/01/cabin-collection-nightstands.html    "

Rick R replied Jul 12, 2012 to Nightstand Plans

5 Jul 18, 2012
Reply by justin waldron

"There will be no problems using the recommended 1 1/4" screws as long as your jig is…"

Rick R replied Jul 12, 2012 to Joining 3/4" oak into 1-5/8" oak

4 Jul 12, 2012
Reply by Rick R

"I would think it would depend on the size of the pieces you are attaching together a…"

Rick R replied Jul 11, 2012 to Joining 3/4" oak into 1-5/8" oak

4 Jul 12, 2012
Reply by Rick R

"As the HD jig is new, I wouldn't know if it is better for your application but I wil…"

Rick R replied Jun 28, 2012 to Re: the table leg discussion

2 Jun 28, 2012
Reply by Rick R

"I'm with Rick on this as it sounds as though he has more experience with MDF and fin…"

Rick R replied Jun 25, 2012 to Laminate, Wax, Seal and MDF

11 Jun 28, 2012
Reply by Gary roofner

"I have three kids and I built them a table for them to work/play on and I built it o…"

Rick R replied Jun 25, 2012 to Laminate, Wax, Seal and MDF

11 Jun 28, 2012
Reply by Gary roofner

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Accu-Cut XL track alignment issue 1 Reply

Hi All,I'm just wondering if anyone else has had this issue and can help me,I recently purchased the Accu-Cut XL and when I went to put the track together I noticed that one of the tracks was different to the others The alignment of the track guide…Continue

Started by Al Barale in Community-Specific. Last reply by KregRep on Tuesday.

Advice on assembling the "offset" bottom of a wall cabinet

Hi,I'm about to build my first wall cabinet, using 3/4 plywood for the box and 1x2s for the face frame. Everything will be assembled using pocket hole joinery. I've attached a basic image of what the cabinet box will look like.I'm planning to have…Continue

Tags: cabinet, holes, pocket

Started by Jeff Welsh in Beginners' Zone May 26.

Product Reviews

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_