View
Discussions Replied To (15) | Replies | Latest Activity |
---|---|---|
"Ken, Thanks for the reply. I looked at those photos and did not see an application…"George Stoltz replied Jan 24, 2013 to Modification to clamp |
14 |
Feb 23, 2013 Reply by Ken Darga |
"I tried using this clamp today and must be doing something wrong because it was not…"George Stoltz replied Jan 24, 2013 to Modification to clamp |
14 |
Feb 23, 2013 Reply by Ken Darga |
"I use sanding sealer,too. I have become accomplished at mixing and matching stains.…"George Stoltz replied Jan 23, 2013 to First project should I assemble or stain and seal and then assemble |
9 |
Jan 25, 2013 Reply by George Stoltz |
"I used a plastic grocery sack and some blue tape. "George Stoltz replied Jan 23, 2013 to Modification to clamp |
14 |
Feb 23, 2013 Reply by Ken Darga |
"Wow. Very, very nice."George Stoltz replied Jan 22, 2013 to My first project |
10 |
Jan 24, 2013 Reply by VICTOR REYES |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service