Kreg Owners' Community

Michele's Discussions (13)

Discussions Replied To (10) Replies Latest Activity

"Thanks for the response. I forgot that in addition to the inlay, I have a 1x3 sister…"

Michele replied Feb 3, 2018 to Only one screw per joint?

2 Feb 3, 2018
Reply by Michele

"The "correctly" part of this might be in question. If we put the wider piece between…"

Michele replied Feb 20, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"Well apparently the faces were the issue. We took about an eighth off on the table s…"

Michele replied Feb 18, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"I was wondering about too much torque actually since on visual, the screw heads are…"

Michele replied Feb 10, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"But I've done this same build in the past with no issues and nothing cut or sanded a…"

Michele replied Feb 9, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"And especially since it's happening on every stinkin' board and we've done this same…"

Michele replied Feb 9, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"What in the lumber would cause this do you think? I can get some plates done up to s…"

Michele replied Feb 8, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"Thanks for the input. Sounds like it's just newbie learning vs something blatantly w…"

Michele replied Jul 5, 2016 to 1x3 stock and 1-1/4" screw came through?

6 Jul 5, 2016
Reply by Ken Darga

"Nope, I'm using the drill guide in the jig itself and I checked the drill stop becau…"

Michele replied Jul 5, 2016 to 1x3 stock and 1-1/4" screw came through?

6 Jul 5, 2016
Reply by Ken Darga

"Hi there, my name is Michele and I'm from north east PA. I'm pretty new to wood work…"

Michele replied Jul 1, 2016 to New Members: Please Introduce Yourself!

3061 Apr 4, 2023
Reply by WESLEY HUNT

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_