Ken Darga's Discussions (2,128)

View

Discussions Replied To (2107)	Replies	Latest Activity
""Strip-out" herein means that the screws threads no longer grip into the joining mem…" Ken Darga replied Mar 7, 2017 to Difficulty Drilling Pocket Holes and Screws In ACQ Treated Pine	11	Mar 8, 2017 Reply by Robert Melrose
"Mark, Perhaps the driving tool torque was to high, that resulted in strip-out. Star…" Ken Darga replied Mar 7, 2017 to Difficulty Drilling Pocket Holes and Screws In ACQ Treated Pine	11	Mar 8, 2017 Reply by Robert Melrose
"I've found most drill bit cutting edges, are not keenly sharpened. I touch-up the c…" Ken Darga replied Mar 7, 2017 to Difficulty Drilling Pocket Holes and Screws In ACQ Treated Pine	11	Mar 8, 2017 Reply by Robert Melrose
"Clean out the wood chips often during the drilling process. (I believe the instructi…" Ken Darga replied Mar 6, 2017 to Difficulty Drilling Pocket Holes and Screws In ACQ Treated Pine	11	Mar 8, 2017 Reply by Robert Melrose
"1. Insure your cuts are at 90 degrees--- this is necessary for accuracy. 2. Use a…" Ken Darga replied Mar 6, 2017 to How to get a frame squared at right angles	2	Mar 6, 2017 Reply by Madhu Sudhan
"Hi Luke, Thanks for your timely reply. Glad it worked out for you. " Ken Darga replied Mar 3, 2017 to Mao Shan 12" tilting arbor table saw	7	Mar 3, 2017 Reply by Ken Darga
"Replacement Belts: Take the belt with you to an ACE Hardware or True Value Hardware…" Ken Darga replied Mar 2, 2017 to Mao Shan 12" tilting arbor table saw	7	Mar 3, 2017 Reply by Ken Darga
"CAUTION--- DO NOT cut large sections of sheet goods on a table saw--- it can potenti…" Ken Darga replied Mar 1, 2017 to Need Table Saw	5	Mar 1, 2017 Reply by Ken Darga
"Michail, Four 4" wheel Heavy-Duty locking swivel casters, located near the outermost…" Ken Darga replied Feb 23, 2017 to Outfeed/workbench help	1	Feb 23, 2017 Reply by Ken Darga
"Jay, Great point you've made re the air-flow direction and dust that can get in the…" Ken Darga replied Feb 23, 2017 to Router for kreg PRS1040	19	Feb 23, 2017 Reply by Luke Troughton

‹ Previous
1
…
7
8
9
10
11
…
211
Next ›

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

Badges | Report an Issue | Privacy Policy | Terms of Service

Ken Darga's Discussions (2,128)

""Strip-out" herein means that the screws threads no longer grip into the joining mem…"

"Mark, Perhaps the driving tool torque was to high, that resulted in strip-out. Star…"

"I've found most drill bit cutting edges, are not keenly sharpened. I touch-up the c…"

"Clean out the wood chips often during the drilling process. (I believe the instructi…"

"1. Insure your cuts are at 90 degrees--- this is necessary for accuracy. 2. Use a…"

"Hi Luke, Thanks for your timely reply. Glad it worked out for you. "

"Replacement Belts: Take the belt with you to an ACE Hardware or True Value Hardware…"

"CAUTION--- DO NOT cut large sections of sheet goods on a table saw--- it can potenti…"

"Michail, Four 4" wheel Heavy-Duty locking swivel casters, located near the outermost…"

"Jay, Great point you've made re the air-flow direction and dust that can get in the…"

Need Help?

Popular Posts & Projects

Kreg Workbench Weight?