Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Use of Biscuits AND Pocket Hole Screws on Same JointDoes anyone use biscuits in addition to pocket hole screws on the very same joint? I can see where using biscuits - if cut correctly - coul… Started by Ken Kortch |
13 |
Dec 5, 2012 Reply by Tom Hendrie |
Support long pieces in your kreg jigrecently I been working with my Kreg jig K3 and I realize long pieces was dificult to support, I had my bench cookies from bench dog tools… Started by Juan Garcia |
3 |
Nov 18, 2012 Reply by John Schaben |
WORKING WITH CEDARHave quickly learned to manually screw the pieces together when working with cedar - have stripped out pocket holes with the power drill ev… Started by Chris Dykman |
10 |
Nov 15, 2012 Reply by Ken Darga |
Using Pocket Jig on 3/8" materialI recently made a small light shelving unit using 1/2" plywood for the sides and back. I used 3/8" plywood for the top, bottom and shelves.… Started by kenny from Sundre |
2 |
Nov 11, 2012 Reply by Ken Darga |
is there a chart or table that explains what to do when attaching different size wood?Hello, I wonder if anyone can help? I am repairing afile cabinet and adding casters. i am securing two 3/4 inch mdf sides to a 1 inch mdf b… Started by charles rivers |
2 |
Oct 15, 2012 Reply by Pierre Vallee |
How would you use the jig for a 45-degree 2x4 joint?I am building a gate that has 45 degree mitered 2x4 corners. I am trying to figure out if you can use the Kreg jig for this type of joint.… Started by Todd Last |
10 |
Oct 3, 2012 Reply by John Schaben |
Simple enhancement to jig markingsThis may have appeared before but for what it's worth, here is a simple enhancement I made to my jig to help with the difficulties of readi… Started by Brian Holroyd |
4 |
Sep 27, 2012 Reply by James Sandlin |
I'm new to the sometimes my screws just been instead of typing is this something I'm doing wrong or what can I do to fix this?I'm new to the Kreg jig. sometimes my screws just spin instead of tightening. Must be doing something I'm doing wrong. What can I do to fix… Started by Ken Kelly |
5 |
Sep 2, 2012 Reply by Ken Kelly |
Drill guide setupI just purchased the Kreg Jig, and was excited about using it. However, when I went to set it up out of the box, I can't get the dril guide… Started by m. brown |
8 |
Jul 30, 2012 Reply by Ken Darga |
Need some advice on how to back out screws to allow for movement of table topI'm about to start build a harvest table using 2" (1.5") pine ... Lots of people suggest backing out the screws a bit when joining the tabl… Started by Shift |
49 |
Jul 30, 2012 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service