This may have appeared before but for what it's worth, here is a simple enhancement I made to my jig to help with the difficulties of reading the scales.
https://dl.dropbox.com/u/4637351/2012-06-19%2007.39.34.jpg
Simply flood the indented figures with correction fluid, then when it is dry scrape off the surplus and give a light sanding.
Brian
Tags:
lol
I used to use the same technique with a crayon on my dice from the old Dungeons and Dragons sets of the 70's. Think I'll give it a shot with my K-Jig also. Thanks for the idea Brian.
It's funny though, how the simplest techniques never go out of style. :)
I just did the "scrape a white crayon across it" trick to make the lettering visible. No one ever uses the white crayons, anyway. Also good for marking tile when using a wet saw.
White Crayon also good for marking problems on tires so you can find them when you get to the shop just dont leave it on the dash of a tractor trailer!!! Big Mess!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service