Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Split Wood on Face FramesI am having a issue with spliting face frames when using Kreg screws. I am using 1x2 oak and a 1 1/4 inch fine thread screw like the chart… Started by Eddie Kirk |
121 |
Jul 30, 2014 Reply by don carmen |
K4 for drawersCan I use my K4 for 1/2 in. plywood drawers? Not sure what the Kreg Micro is and if it is necessary to use on 1/2 in. stock. Started by Paul Crow |
2 |
Jun 11, 2014 Reply by Paul Crow |
Depth Setting Gauge QuestionI have material that is 1-1/4" thick and I'm unsure as to where I need to line up the drill bit to set the collar. Is it at the line betwee… Started by Staci |
3 |
May 27, 2014 Reply by Staci |
Working with lumber thicker than 1 1/2"Hello fellow wood workers. I have a cabinet project I am working on, using 2x4 mahogany lumber that is truly 2"x4". The only kreg jig avail… Started by Aaron Ferrer |
3 |
May 15, 2014 Reply by Paul Steiner |
Pocket hole spacingI'm building a stand-alone pantry. The sides are 2'x8' oak plywood. The front face frame is made from oak lumber. I have a question on the… Started by Chuck Curry |
1 |
Apr 16, 2014 Reply by Ken Darga |
Guide Block, accurate?I've been using Kreg to join my projects for the last 10 years, so I'm very familiar with the system. I'm in the process of a new project… Started by William Swartz |
5 |
Mar 28, 2014 Reply by KregCS |
compensating for undersized 1/2 inch plywoodHi All I am making a dresser and am now on the drawer stage, I orderd 1/2 birch not thinking to ask for real 1/2 baltic birch. So the ques… Started by Shawn |
4 |
Mar 24, 2014 Reply by John Schaben |
Tips to Avoid Wood-SplittingThe number one suggestion is to make sure that you are using Kreg Screws. Kreg screws have several features designed to limit, and even eli… Started by KregRep |
37 |
Mar 20, 2014 Reply by Ken Darga |
Cabinet doors with Kreg JigHas anyone built cabinet door frames using pocket holes to join the rails and stiles? I have to build a few more doors for my cabinet proje… Started by Derek Gould |
40 |
Mar 7, 2014 Reply by Rick |
Kreg Clamp Storage IdeasI have clamps, I mean a lot of clamps and I built a really nice functional clamp cart for my Bessey's and my wooden clamps and my spring cl… Started by Joe Scharbrough |
5 |
Feb 24, 2014 Reply by james wilhelm |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service