Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
flushing pocket plugswhat is the best method for flushing off pocket plugs without damaging the veneer ? Started by Mike Dawson |
4 |
Dec 13, 2012 Reply by Renaldo Alcala |
Shaker style coat rackHi to everyone, well i guess this is my last little project till after christmas.Ifinished my shaker style coat rack for our hall.I hand pa… Started by michael evans |
0 | Dec 13, 2012 |
chalkboard paint.This weekend I am going to build a small wall cabinet for the bedroom I am trying to turn into a small workshop. I will build it out of ply… Started by rick kiot |
3 |
Dec 13, 2012 Reply by Jeff Muehl |
The Ridgid Table Saw and Planner at Home DepotI was at my local Home Depot today and I could not believe the prices for the table saw and the planner the saw was 348.00 I paid 449.00 a… Started by ray vile |
2 |
Dec 12, 2012 Reply by ray vile |
12mm board pocket holes master systemUsing 1/2" (12mm) board i have found the holes come out very close to the edge, and given the angle, they always split off the edge of the… Started by David Moore |
2 |
Dec 12, 2012 Reply by David Moore |
osbAre pocket holes good for osb wood? Started by Frank Windsor |
1 |
Dec 10, 2012 Reply by Ken Darga |
Makeup vanityLooking for plans for a makeup vanity. Started by John |
0 | Dec 10, 2012 |
Mini jig screw sizingWhat is the size of the screws required for the mini jig? Do they only come in fine thread? Started by Charles Andrews |
0 | Dec 7, 2012 |
Kreg plugsHi all, christmas is a coming my wife said to me what do you want as a pressie?Well i made a sigh and a pause as if i did not have a clue .… Started by michael evans |
2 |
Dec 7, 2012 Reply by michael evans |
Dragon natural.This post has nothing to do with woodworking, but may be of interest to some here on the site. Some of you may have seen the commercial for… Started by Gary roofner |
0 | Dec 7, 2012 |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service