Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Introducing myself to all membersI am from Ohio and I put myself in the beginners zone. The reason I put myself in the beginners zone is because I am ready to try something… Started by Brenda |
0 | Nov 18, 2014 |
Particle BoardI'm making, let's say, a 3-sided box using particle board. It's to be used as a "stand" per the plans. I'm thinking of using glue and poc… Started by daddywoofdawg |
1 |
Nov 13, 2014 Reply by Jay Boutwell |
Let's have more workshop photos.Hi everyone. I thought it would be a good idea to see more photos of everyone's shops. Most of us enjoy seeing other peoples' setups. Wheth… Started by michael evans |
10 |
Nov 13, 2014 Reply by Jay Boutwell |
Slides for pull-out printer shelf?I've been asked to make a cabinet for a relative with a pull-out shelf for a printer that weighs 20 lbs. If anybody has done anything simi… Started by Andy Harris |
3 |
Nov 13, 2014 Reply by Gary roofner |
The Woodworking Show / Sacramento, CAAnyone going to The Woodworking Show in Sacramento, CA? Started by Stanley C. Pearse |
0 | Nov 7, 2014 |
First Projectmy first project. 2008 Started by Jon Dunham |
3 |
Nov 6, 2014 Reply by Jon Dunham |
Screws coming through wood?Often my screws will come through the other side of the wood. I'm wondering what I'm doing wrong? I'm using a 1x4 and 1&1/4" screws. … Started by CK |
5 |
Nov 5, 2014 Reply by Ken Darga |
Size of ScrewI downloaded instructions for a child's Adirondack chair from Ana White. In the instructions, all the wood is 1 inch (3/4) by assorted wid… Started by Kay Klein |
4 |
Nov 5, 2014 Reply by Kay Klein |
Table Saw Cross Cut SledWant to build a table saw sled. Would you make it out of MDF or Baltic Birch plywood? Secondly, what plans would you recommend? Started by Stanley C. Pearse |
3 |
Nov 4, 2014 Reply by Jay Boutwell |
Kreg Pocket-Hole Screw LengthIf you are going to use pocket screws to join material of different thicknesses, which dimension do you use? For instance, joining 3/4-inc… Started by Tom |
2 |
Nov 3, 2014 Reply by Ed Ward |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
