Create a workspace almost anywhere with this drop-front desk. Mounted to a wall, it doesn’t take up any floor space, which means you can hang it wherever you need to work. Plus, this desk can easily be installed at a height that’s convenient to work standing or sitting, whichever you prefer.
This desk is made entirely from a half-sheet of plywood that gets dressed up with iron-on veneer edge banding. The desktop opens on a pair of hinges, and gets supported while in use by a pair of unique, adjustable supports. The supports hold the desktop in position, and they prevent it from falling open too quickly.
The plan is attached as a PDF below. If you would like to print the plan, you will need to first save it to your computer. Then, open it in Adobe Reader and select Print. You can download Adobe Reader free here.
Once you're done building, be sure to share your project. Happy Building!
Tags:
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service