This is my shop cart with below the tabletop my pocket hole station. In my opinion is this the best way to store all my pocket hole stuff. I can use the cart as a table and when I want to make some pocket holes, I just need to flip over the table top. I hope it helps you to make your ultimate pocket hole station.
Kind regards!
Comment
Thank you for the comments,
I don't have plans. The cart is an old TV-cart wich I restored, the cart was already in use. I started with a sheet of "wisa spruce" multiplex of 12 mm (1/2 inch) and cut it down in peaces wich I think it's for me the best set up (the jig isn't too high or to low). Then I mount the box under the tabletop wich I cuts in 2 peaces (one that flips over and one for my drills). I was thinking about an easy click system for remove my jig and I came up with 2 clamps (I don't know how it's called in English :-) ). For small peaces (framework) I use the jig mounted in the cart but for bug sheets (cabinets) I mount the jig on the tabletop with a Kreg clamp. It's a little bit searcing for the right position. Sorry for my bad English because I live in Belgium ;-)
Great setup. Looks like you even made room for wider boards. Nice.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community