Tags:
Stefano,
I was curious as to the diameter of the motor itself. We do have other motor pads but I want to make sure that they will work for you. If you could let me know I would be able to better assist you.
Stefano,
I'm sorry to inform you that we do not have a clamp pad that will accommodate that size of motor. The motor pads that we have are the 89mm that came with the lift and then a 105mm and 107mm. i have heard of some customers sanding down the smaller pads to make them work but they would have to be consistent in order to hold properly. If you wish you are more than happy to return this product from where you purchased it for a refund. If you have any other questions please let us know.
Stefano,
The motor pads that we have for our lift does fit the majority of routers on the market. We designed it to work with the most common routers on the market which is why we went with those three sizes. My concern with using the tape like you are referring to is that once compressed enough to hold the motor in place it might make the router misaligned and the bit would no longer be perpendicular to the top causing issues. Usually the best solution is to take down the smaller pads to the size of your router motor.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service