Comment
Just wanted to say thanks for the extra info. Nice job! Starting mine now.
Hi Jerry,
Thank you for the interest in the cabinet. The overall dimensions for the cabinet are 44"w x 31.5"d x 84"h. I cut the side pieces 30 x 79.5. The wheels on the bottom added 3.75". I used 4" wheels and I inset them on the bottom. Basically, I wanted to make sure the cabinet would fit under my garage door rails. I left myself an inch or so for any errors in measurements and for the slope of the garage floor. I was trying to cover my bases and not have any problems after I built it. For the top shelves I made one side 15.5" wide and the other side 13.75" wide. I used 3/4 plywood for the center divider, sides, and some of the lower shelves. I was using scrap wood my dad had given me for part of the project. I know I made it harder on myself having to fit pieces together to get the desired measurements in some cases, but I did save a little money in doing so. I posted several pictures as I was building it. I hope this helps you. Have a great day! :)
Can you tell me what the dimensions are (H - W - Depth)? Also what size wheels did you use?
Love this! Just what we've been looking for our workshop. Thanks
cool. like it
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community