Here is a cabinet I built with wings on the side for my Foreman.
Its made out of Lyptus plywood and framed in Mahogany.
I also have it attached to my dust collection system.
I still have two small drawers to build that will go under the wings.
All in all I am happy with the cabinet, the Foreman, not so much.
Thanks for viewing.
Dave
Tags:
I love your cabinet and I also love my Foreman. Mind if I ask why you don't like the Foreman?
Edit;
Never mind I see your other post on the cherry wood.
Suzy-
There a lot of things I love about the Foreman. The stops on it are really handy, the speed at which you can bore
plywood is really, really great.
I just have the issue with the cherry lumber. I have tried all the tips in the other thread. But in the end I had to switch back to the hand held drill and the clamps.
Which after doing about thirty rails that way I really believe the issue is the bit in the foreman. Because I have
not had one problem with a drill mounted bit.
Thanks for noticing the cabinet.
Dave
Big kahuna Woodworks
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service