Cedar Coffee Table with Parks Super Glaze Resin Epoxy finish
Comment
Thank you Jay.
I am glad I was advised to use the Butterfly inlays. This entire project was a learning process that I can use going forward.
Hi Roger, Your project turned out exceptional well. It is one nice piece of work. I am glad that I was able to give you some help. I am sure that you will be able to find several uses for this type of filling and it is an excellent filler for loose knots and actual holes in wood. You will be able to salvage many beautiful pieces of wood that would be in the burn pile if you are not familiar with this technique. Like I had said I have often purchased from wood dealers some very ratty looking lumber and ended up with treasured cabinetry and furniture for a very low price. It is funny that nature will give you something like it and it is something that you can not duplicate.
I like the butter fly inlays as well and this should be one strong tabletop and it certainly is an eye catching and very appealing projects. I do appreciate your updating of it as I have wondered how you were doing with it.
Jay Boutwell - I decided not to use any dye but the balance of your advice was very much appreciated
Many thanks to
Ken Darga
KregRep
Jay Boutwell
for advice and help with this project.
Ken i did use the Envirotex to fill the holes but the local store ran out so i finished the top with Parks
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community