Comment
GREAT PROJECT, I JUST FOUND A SOLUTION TO FINISH MY PATIO CORNERS
THANKS
those I picked up at kmart
I tried that but the corner of the 4x4 gets in the way of the insert , I love my k5 jig but for that getting the side boards joined to the 4x4 I would just use a 2x4 split in half with a 1 1/2 sq leg . but as I found out it is very easy to have the pc come out unlevel on one or to legs .. but that just what I found out .
Thanks for the comments Ron, do you feel that using the Kreg tool and joining two boards at the corners would do just as well for the corners?
hey Howard Rainey I cut the 4x4 into a " L" shape on the table saw . leaving an inch and a 1/4 and then you can use the left over cut out for a smaller planter ie 10" sq.. For the top ..... I turn the top upside down and sq up the wood planter on the top then I draw a line on the inside marking the inside of the planter box . and then I screw a 1" sq 12" pc of wood to the top and then turn everything rightside up and then screw that wood strip to the side of the planter box .... after I get all of the xmas things done I will post step by step photos on everything on how to build the planter box or maybe a video .
Where did you get the planter box inserts??
Couple of questions:
1. How did you connect side boards to the vertical 4x4's?
2. How did you connect the top flange to the main box?
3. All stainless steel screws?
Great work Ron, I am adding this to my "But honey, I have my own list to work on" list
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community