Hello all,
New to the forum and to my pocket-hole system. For my first project, I decided to build the custom storage unit from the free plans section: https://www.kregtool.com/get-inspired/plans.aspx
Here's my question: In the plan, it refers to the KMS7507 Kreg Mini Trak and I cannot find that listed on the site as an accessory, but I did see KMS7509. Is that an updated part # that would be interchangeable to work with the KJSS Material Support Stop? Actually, I can't find the Material Stop either, so is there a replacement # for that too??
Appreciate the help everyone. Love some of the plans and project ideas you all share on here.
Thanks again.
Tags:
Hi Jeffrey. Thank you for posting. You are correct; the KMS7507 was an older version of the Kreg Mini Trak. The current version you came across will also work with this plan: https://www.kregtool.com/store/c17/trak-components/p94/mini-trak--4... (the 48" Kreg Mini Trak, Item# KMS7509). We still offer the Material Support Stop you mentioned as well: https://www.kregtool.com/store/c22/kreg-jigreg-accessories/p63/mate....
If you are looking to purchase either of these items, you can search for a Kreg Dealer near you on our website: https://www.kregtool.com/find-a-dealer/default.aspx?source=1677. Once you're there, simply enter your zip/postal code to see a list of dealers in your area. If you're unable to buy locally, we recommend www.amazon.com, as they are generally very straightforward with their shipping prices and time frames. We also sell directly through our website, although shipping fees will apply.
If you have any further questions, feel free to contact Kreg Customer Support directly by calling 800-447-8638 or by emailing customerservice@kregtool.com. They are very knowledge and will be more than happy to answer any questions you may have. Thanks again, and have a great day!
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service