The wheel has a 12 volt ,DC. motor that turns 3 RPM. , some of the seat,s were sticking , have to set them and glue the pins, first time for making a video, HA!!!
Tags:
Comment
HI Ronda, thanks for the very nice comments on my wheel !!! The video was not great and I have fixed the seat,s that were sticking , HA!! This is just a toy that I built with out any plan,s and the reason I posted it was to show beginner wood workers , that if you put your mind to it you can build it !! Think of it , draw it and build it, happy wood working to all , JIM !!
Hey Jim! Wonderful job on this! I am glad you did a video of it as stills don't do it the same justice.
I think I'm in line next to Mick for the first ride!
Hi Lorrie, thanks for the very nice comments on my wheel !!! Yes it dose make me feel good that I could design and build this wheel with out any plans and make it go around with a motor !! Did make me think on the motor , as I went through three of them and a few belts to get it to turn at 3 RPM,s !!! Yes it dose make a wood worker proud when a project comes together and work,s !!, Have a good day, JIM !!
Hi Jim,
very nice job on the Ferris Wheel. You mentioned that you had been thinking about it for a year or so. I'm so glad that you were able to make it. It looks great!!! and the fact that you mounted a motor to it so that it goes around really puts it over the top!!! Great Job! Doesn't it make you feel good to finish a project that you have imagined in your mind? And see. .. you did a really good job. You should be very proud of it. :)
Mick , thanks for the very nice comment on the wheel , it was a challenge !!!
Great job on the Ferris wheel Jim , really clever how you mounted the motor . I will be over to have a play ha .
This was a one of a kind toy project, but did make me think a bit as there were no plans for this one , HA !!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community