Comment
Rick F,
I posted some pictures from earlier on in the construction phase if you want to see more of the assembly process.
Thanks Ronda!
Rick F,
I used Cedar for the entire structure.
The fence is only on the north side. There is rubber brown mulch on the inside area where we will be walking. I may eventually add a center bench with a flip up seat for storage of tools.
I used 2x6 for the sides and the top ledge. The cleat underneath the ledge is a routed 2x4.
Perhaps I can post some pictures that I took during the build.
I did use a high pressure low volume sprayer to apply stain/sealer.
Thanks so much. It definitely was more work than expected...especially digging out the inside of the hill by hand...but I'm happy with the end results.
Absolutely beautiful! WOW!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community