I presently have a GMC 10 " table saw. (yeah its old), They don't even make parts for it anymore. I am interested in a new one, however would like one that has at least 26" rip capability. Don't have a lot to spend on a high end model. A recommendations? Present
one works but I don't have a fence for it and well a new fence system cost as much as a new table saw.
Tags:
Well Charlie it sounds like you need a table saw. I now that some of the lunch box table saw look good about right now but if you don’t have a big shop to work in they are nice and the price ant bad ether .
But thank for a min what about a contractor ‘s saw if you do a lot of wood working for example I own a Porta-cable 10’’ contractor’s table saw it has a 2 hp motor 31’ reap fence and a mobile base and I have thrown every thing at this saw for the past 7 years and I use a lot of Oak in my shop and I cut a lot of ¼’’ panels as well and I payed $ 600 but it was worth the money. Good luck on your next table saw.
Thanks Jon Ziverts I dont now it was discontinued. But Grizzly has GO732 contractor style saw.
it has a 1 1/2 hp motor , 25 1/4'' x 40'' w and its only $ 650.00.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service